0
What else can I help you with?
What is the aggregate capacity of water that a 100 pound propane cylinder can hold?
A 100 pound propane cylinder can hold approximately 23.6 gallons of water.
How much water can a measuring cylinder hold?
The capacity of a measuring cylinder varies depending on its size and design, with common volumes ranging from 10 mL to 2,000 mL or more. Standard laboratory measuring cylinders typically hold between 100 mL and 1,000 mL. Always check the markings or specifications on the specific cylinder being used to determine its exact capacity.
What is the first thing you have to determine when using a graduated cylinder?
The first thing you have to determine when using a graduated cylinder is the volume of liquid it can hold and the smallest volume increment it can measure. This helps ensure that you are using the appropriate graduated cylinder for your measurements and that you are able to read the volume accurately.
How many gallons of fuel will a 99 jeep wrangler 4-cylinder hold?
A 1999 Jeep Wrangler with a 4-cylinder engine typically has a fuel tank capacity of around 15 gallons.
How many gallons does cylinder hold?
To calculate the volume of a cylinder in gallons, you need to know the radius and height. The formula to calculate the volume of a cylinder is πr^2h, where r is the radius and h is the height. Once you have these values, you can convert the volume to gallons based on the conversion rate of 1 gallon = 231 cubic inches.
How much oil does 2009 ford focus hold?
A four cylinder 2009 Ford Focus hold 4.5 quarts of oil.
What is the torque spec for a front wheel bearing on a 93 ford tempo fwd 4-cylinder?
center nut 180-200 ft lbs. put wheel on ground with tire on for resistance. may be someone hold brakes on.
How do you take apart the distributor on 1992 Ford Tempo?
To take apart the distributor on a 1992 Ford Tempo, first ensure the engine is off and the ignition key is removed. Disconnect the battery and then remove the distributor cap by unscrewing the retaining screws. Next, unplug the wiring harness connected to the ignition module and carefully detach the module from the distributor. Finally, remove the distributor by loosening the hold-down clamp and lifting it out, taking care not to disturb the timing position.
How many gallons of gas does a 1992 Mazda B2200 hold?
The 1992 Mazda B2200 will hold close to 17 gallons of gas. The 1992 Mazda B2200 is a four-cylinder vehicle.
How do you replace a distributor on 1992 Ford Tempo 3.0 liter?
To replace the distributor on a 1992 Ford Tempo 3.0 liter, first disconnect the negative battery cable and remove any components obstructing access to the distributor. Mark the position of the current distributor to ensure proper alignment, then disconnect the wiring harness and remove the distributor hold-down bolt. Carefully lift out the old distributor, align the new one with the mark, and reinstall it, ensuring it seats properly. Reconnect the wiring harness, secure the hold-down bolt, and reattach the battery cable.
How many gallons of gas does 1992 Ford Explorer hold?
I believe the 1992 Ford Explorer 4 door holds 19.3 U.S. gallons
How many gallons of gas does a 1997 4-cylinder Ford Escort Hold?
12 gal
How to adjust the clock IN A 1994 Ford Tempo?
Press and hold the volume knob in use the tune and select buttons to change hour and minute respectively
What is the fuel capacity 1990 4-cylinder 2.3 Ford Ranger?
All I know is the 1992 2.3L truck held about 16 gallons. I bet yours is about the same. The Super Cabs with the V-6 motors hold about 20.
How much oil does a 1992 Isuzu Trooper hold?
Almost any 4 cylinder engine will only hold between 3-4 litres of oil.
How many gallons of gas does 2004 ford escape hold?
16 U.S. gallons ( four cylinder and V6 )
How many gallons of gas does a 1992 Ford Taurus hold?
it eithers hold 16 or 18.5 depends on model. MY 92 Ford Taurus GL, 3.0L, V6, holds about 15 gallons. -Jajo ;)
