0
A bow sight is adjusted by moving the pin in the direction of arrow impact. If the arrow is high of the spot, move the pin up. If the arrow is hitting left of spot, move pin left. etc. Just rember dont move the sight for the first few arrows, it might just be tou torquing the bow and not the sight.
Still curious? Ask our experts.
Chat with our AI personalities
Taiga
Judy
BeauAdd your answer:
Earn +20 pts
The best and safest way to put a string on a bow is to use the?
bow stringer
How do you adjust a Pearson renegade bow?
A Pearson Renegade compound bow may be adjusted by tightening the limb bolts. These bolts will help adjust the weight of the bow. The bolts are hexagonal and need to be rotated in the same manner - the top and bottom. The best way to adjust the bow is to take it to a shop that specializes in archery so they can properly adjust the weight.
What way do you turn the screw on the bow of the violin to loosen it?
Depends on the bow. A compound bow has dials which you can use to either tighten of loosen it. Recurves and longbows are impossible to loosen;(
How do you re-string a compound bow?
To re-string a compound bow, you must first get the bow limbs to bend. The easiest way (and the safest) is to place the bow, with the string above the bow (it will look like a smile) in what is called a "bow press". Once the bow is in the press, it is pushed down to bend the limbs ("compressed"), causing the string to go slack; the string is now removed from the cams and the new string is installed. De-compress the bow and remove it from the press.The bow press can be somewhat expensive to purchase, so it may be best to take the bow to an archery shop and have the string replaced there. Due to the amount of pressure required to bend the bow's limbs, as well as the need to keep them bent while changing the string, attempting to restring a compound bow without the proper equipment is definitely not recommended.
How does a violin make a sound?
There are two ways to vibrate the strings. The first way is to pluck them. This is also called pizzicato. The second way is to use a bow, which is the most common way people play the violin during most musical pieces. The bow is usually made from wood, but it can also be made from fiberglass or carbon fiber. The bow is strung with finely combed horsehair.
