Mathews SoloCam bows have 10 pound weight reduction range from your Bow's peak weight (example : if your bow has peak weight of 70 pounds, you can adjust it as low as 60 pounds).Draw weight adjustments are made using either a 3/16" or 7/32" Allen wrench. Turn the limb bolt clockwise to increase the draw weight and counterclockwise to decrease the weight. Each rotation is equivalent to 2 to 4 pounds of draw weight. It is very important to adjust the limb bolts equally but do not exceed 5 full turns out from maximum draw weight.
My bow shows the peak weight is 65, and I'm a medium-sized woman who just started Archery so I need to know if I can lower it. I tried so hard to pull the string that thought I was either going to snap it or tear a muscle! It won't budge. It's a Bear Whitetail II 2 compound hunting bow. Thank you so much for any help!!! =)
Question, did you purchase your bow from a dealer or private party. If it was a dealer I wonder why{ he} or she didn't set you up. I am a beginner and when I bought my bow they set my draw length and draw weight. If you bought from a private party try a dealer and I'm sure they would be glad to adjust your draw weight.
it has a weight lock on it to adjust the poundage you must unscrew the lock then tighten with the desired alan wrench
****Answers**** Every bow you should be able to adjust that.
http://www.dnr.sc.gov/regs/pdf/huntingregs.pdf No restrictions on draw weight in SC.
80 pounds is a very low draw weight for a crossbow and a very high draw weight for a standard bow
yes. it weakens the limbs and reduces draw weight. best to unstring the bow while in storage.
The draw weight is adjusted by tightening or loosining the screws that hold the limbs in their pockets attached to the riser.
The draw weight should be marked on the bow. You cannot go any higher than the marked draw weight unless your bow has removable limbs, then you could buy limbs with a higher draw weight. You will ruin the bow if you use it with a higher draw rate.
just draw.
Limb bolts are small components on a compound bow that are used to adjust the amount of draw weight. By tightening or loosening the limb bolts, the tension in the limbs is altered, which in turn changes the draw weight of the bow.
A head and a beak
it has a weight lock on it to adjust the poundage you must unscrew the lock then tighten with the desired alan wrench
30" is not a draw weight, it is a draw length. It is the length of the draw from the bow to the string when the bow is drawn.
just draw gold-haired winged ram.
****Answers**** Every bow you should be able to adjust that.
I have a 1989 Browning Accelerator Plus and I was wanting to adjust the draw length?
Draw weight is the power the arrow is loosed at. Bows with more draw weight like long bows require very strong people to handle. The better the draw weight the further/harder the arrow flies eg: Arrows peircing chainmail... Hope this was the answere you were looking for. Enjoy...
To draw a golden poopy one starts by drawing a circles in a triangle shape and and another 3 circles surrounding the first 3 circles that one has drawn.