What are the specifications of a f1 car?

Answer 1

Current regs are a V-8 engine, 2.4 liters, normally aspirated, limited to 19,000rpm, weighing no less than 95kg. Cylinders must have 4 valves, single spark plug and single injector, and variable valve timing is not allowed. Cylinder blocks must be aluminum alloy, crankshaft and cams iron alloy, and pistons aluminum alloy. Composites are not allowed in the engine structural elements. The starter system is not part of the engine system- external removable starters are required. Engines may have anti stall devices, but must shut down within ten seconds after an accident. regs change. Answer Basic specifications include that the engine has a capacity limit of 3.0 litres and must have ten cylinders. However, there is a host of other regulations concerning height, width, weight, braking systems etc, plus many more.

F1 cars in for more then 10 years used 3.0 litre V10 engines that very capable of producing 980 to 1000HP. After the FIA started taking notice F1 car engines were limited to 2.4 litres producing 750HP.

Answer 2

Engines: For a decade F1 cars had run with 3.0 litre naturally-aspirated V10 engines, but in an attempt to slow the cars down, the Fédération Internationale de l'Automobile (FIA) mandated that as of the 2006 season, the cars must be powered by 2.4 litre naturally-aspirated engines in the V8 engine configuration that have no more than four valves per cylinder. Further technical restrictions such as a ban on variable intake trumpets have also been introduced with the new 2.4 L V8 formula to prevent the teams from achieving higher rpm and horsepower too quickly. As of the start of the 2009 season all engines are now limited to 18,000 rpm in an effort to improve engine reliability and to cut costs down in general. Transmission: Formula One cars use semi-automatic sequential gearboxes with six or seven forward gears and one reverse gear. The driver initiates gear changes using paddles mounted on the back of the steering wheel and electro-hydraulics perform the actual change as well as throttle control. Clutch control is also performed electro-hydraulically except from and to a standstill when the driver must operate the clutch using a lever mounted on the back of the steering wheel. By regulation the cars use rear wheel drive. Car Construction: The cars are constructed from composites of carbon fibre and similar ultra-lightweight (and expensive to manufacture) materials. The minimum weight permissible is 605 kg (1334 lb) including the driver, fluids and on-board cameras. However, all F1 cars weigh significantly less than this (some as little as 440 kg) so teams add ballast to the cars to bring them up to the minimum legal weight. The advantage of using ballast is that it can be placed anywhere in the car to provide ideal weight distribution.

Answer 3

The F1 racing car is similar to our road car in many aspects. It contains most of the parts that we can see in our road cars. The main difference being, the car is designed for optimum speed & performance. Some of the main parts of a F1 car are:

Answer 4

A modern Formula One car is a single-seat, open cockpit, open wheel race car with substantial front and rear wings, and engine positioned behind the driver. The regulations governing the cars are unique to the championship. The Formula One regulations specify that cars must be constructed by the racing teams themselves. The F1 racing car is similar to our road car in many aspects. It contains most of the parts that we can see in our road cars. The main difference being, the car is designed for optimum speed & performance. Some of the main parts of a F1 car are: · Engines · Transmission · Aerodynamics - Wings · Steering wheel · Fuel · Tyres · Brakes

Answer 5

The size and dimensions of Formula One cars are tightly controlled by the regulations. They must be no more than 180cm wide. The length and height of the car are effectively governed by other specific parameters.

For example, bodywork ahead of the rear wheel centre line must be a maximum of 140cm wide. Bodywork behind it must be no more than 100cm wide. Front and rear overhangs are limited to 120cm and 60cm respectively from the wheel centre lines.

The strict regulations mean that the teams inevitably end up with very similarly sized cars. As a typical example, the 2007 season Toyota TF107 is 453cm long, 180cm wide and 95cm high.

[Quoted from The Official Formula 1 Website, link below:]

http://www.formula1.com/inside_f1/rules_and_regulations/technical_regulations/6847/

Answer 6

The F1 racing car is similar to our road car in many aspects. It contains most of the parts that we can see in our road cars. The main difference being, the car is designed for optimum speed & performance. Some of the main parts of a F1 car are: · Engines · Transmission · Aerodynamics - Wings · Steering wheel · Fuel · Tyres · Brakes

Answer 7

In soviet Russia car looks at main features of you

Answer 8

A typical car will be in the region of 4635mm long, 1800 mm wide and 950mm high.

Answer 9

30.000 litér vagy 300.000 mittomén

Answer 10

2.0 litre engines no turbos