First you kick its dog then twist its balls a sing hallalujah and kumbaya
i don't think you can you will need to bye a new pull start or pull the cover of and find a piece of line that will go around the pully so you can start it
Get a new sparkplug :) test the spark,tae plu out and leave in coil pull pull sartif it does a litle sparkits fine
well whats the problem with it I've got a small motorbike, (Mini Moto) which I have been experiencing problems with, The clutch is engaged when the bike is static. When I pull the rip-cord the back wheel moves with it and therefore makes it very hard to start. Even when I lift the back wheel off the ground and pull as hard as I can it still doesn't start. I've guessed that the throttle is stuck and I have tried to "Un-Stick" it but I'm getting no luck. What can I do.?
If your mini moto has gears...you can use a meathod called "popping it". it works 99 out of 100 timnes... someone gets on the bike and another person pushes it until it reaches a pretty fast speed.... then once at that speed you "pop it" into first gear and it should start... if it just stops as if you hit the brakes then you werent going fast enough...i hope this helps you
use the kick start
To start a mini moto with a drill, first remove the spark plug and insert a drill bit that fits snugly into the plug hole. Ensure the drill is set to reverse and securely attach it to the drill. Then, pull the drill's trigger to turn the engine over, which should create enough compression to ignite the fuel mixture. Once the engine starts, quickly replace the spark plug to resume normal operation.
you pull like in a mower
use a half inch drill
no
repair the pull start ?
it depends because if it's a kick start you turn your choke then kick the start and if you got a pull start the you turn the choke and pull it a few times. :P
put they key in, turn it, pump the kicker, and pull the throtle,