where is the fuse for the trip computer on a 2001 gran prix
A computer is a very smart so it is working
The possible cause is that the light bulbs have burned out. You have to remove the entire dash facing to access the computer. The facing is removed by gently pulling on it. It will pop off and allow access to the screws holding the trip computer in place. Remove the trip computer carefully and remove the bulbs by turning them out. Hope this helps
There is a fuse in the back of the trip computer that needs to be replaced
I have the same exact problem with mine. mine went out after I put a aftermarket CD player in it update me if you figure the problem out
In a 2002 Acura MDX, the fuse for the trip computer display is typically located in the under-hood fuse box or the interior fuse box. You can find the fuse boxes near the driver's side of the dashboard and under the hood near the battery. Refer to the owner's manual for the exact fuse location and specifications to ensure you replace the correct one if it is blown.
#19
To reset the trip mileage on a 2016 Citroën C4 Grand Picasso, locate the trip computer button on the dashboard or the steering wheel controls. Press and hold the button until the trip mileage resets to zero. Ensure the vehicle is in the "on" or "run" position, but the engine does not need to be running while you perform this action.
If your talking about the Driver information center check this link http://www.automotiveforums.com/vbulletin/showthread.php?t=336441 If you need the bulbs and cant find in your home town try this link http://www.rockauto.com/catalog/raframecatalog.php?catalog=35&partnum=PC119&a=FR35-PC119 hope that helps
Trip Flip - 2012 Grand Canyon Road Trip 2-12 was released on: USA: 26 May 2013
No, wiring is not there for the extra functions.
On a 2001 Volvo S40, the fuse for the trip odometer memory is typically located in the fuse box under the dashboard on the driver's side. You may need to consult the owner's manual for the exact fuse number, as it can vary based on the vehicle's configuration. If the trip odometer is not functioning properly, checking this fuse is a good first step.
To reset the trip computer in a Mazda RX-8, turn on the ignition without starting the engine. Locate the trip computer button on the dashboard or steering wheel; it may be labeled "Trip" or "Reset." Press and hold this button until the display resets to zero. Release the button, and the trip computer should now be reset.