The blaster 200 is a 2-stroke, therefore you need to mix the gas and oil, trying running a 50:1 ratio, 50 parts of gas to one part of oil.
yes . gas is made from oil..
No, you do not mix oil with the gas as it is a 4 stroke and has an oil resivoir.
its a mix of 32-1 oil mix.
4 cycle means that you do not mix oil with the gas. They will have a place for the oil and a place for the gas seperate. Although, not many weedwackers have 4 cycle engines... 2 cycle engines are the ones that you need to mix oil with the gas.
Look on the oil container and the engine that you want to use it in. The engine will tell you what ratio to mix the oil and gas at. The container of oil will tell you what amount of gas should be mixed with it. I have found that the best way is to put the oil into an approved gas can and then add the gas to it. This helps to mix the oil better.
Fuel /oil mix is 50:1
2.5 Ounces it say the mix rate on all 2 stoke oil containers. Add the oil then the gas to get a good mix.
No it does not mine just started I am by passing the oil injection pump because its broken but it started on just gas no oil
If you mix the oil and gas together in the proper mix and do not add oil to the oil resivoir you will be fine.
every gallon of gas 4 ounces of oil
40 ounces of gas to 1 ounce of oil