On the 1994 Yamaha Breeze the valve clearance on the intake should be set at 0.006 inches. The valve clearance on the exhaust should be set at .011 inches.
Intake: .004-.006 Exhaust: .006-.008
clearance valve of 225 Yamaha
What is the valve clearance for a 2002 yamaha kodiak 400 4x4?
On a Yamaha 1980 XS400 the valve clearance for the inlet valve should be 0.0003 inches. The valve clearance for the exhaust should be 0.006 inches.
Oh, dude, you're really getting into the nitty-gritty with that one! The valve clearance on a Yamaha YBR 125 is typically around 0.05mm for the intake valve and 0.08mm for the exhaust valve. But hey, who's measuring anyway, right? Just ride that bike and enjoy the breeze!
What are the valve clearances on a 2001 Yamaha grizzly 600?
Valve clearance (cold)IN 0.10 ~ 0.15 mm (0.0039 ~ 0.0059 in)EX 0.20 ~ 0.25 mm (0.0079 ~ 0.0098 in)From Yamaha shop manual
The valve clearance for the 1988 Yamaha Terra-Pro YFP350U is typically set at 0.10 mm (0.004 inches) for both intake and exhaust valves when the engine is cold. It's essential to check and adjust the valve clearance periodically to ensure optimal engine performance and longevity. Always refer to the owner's manual for specific maintenance guidelines and procedures.
To adjust the valves on a Yamaha 350, first, remove the valve cover and ensure the engine is at top dead center (TDC) on the compression stroke for the cylinder being adjusted. Use a feeler gauge to measure the clearance between the rocker arm and the valve stem, adjusting it to the specified clearance by loosening the lock nut and turning the adjustment screw. Once the correct clearance is achieved, tighten the lock nut and recheck the clearance to ensure accuracy. Finally, replace the valve cover and ensure all fasteners are securely tightened.
To adjust valve clearance 6he1 just follow the instructions on the users manual.
The valve clearance for the 1983 Yamaha Virago 500 is 7.2 mm. The exhaust valve lift is 7.7 mm. The vehicle gets on average 51 miles per gallon.Ê
16mm street