A person can remove the seat on Yamaha BW350 motorcycle by depressing the release under the edge of the seat. The seat can then be raised and removed from the bike.
Take the key to motorcycle, insert it in the seat lock on the left side of the motorcycle, under the seat cowl, unlock lock, lift seat up and pull seat out.
The Yamaha 1200 motorcycle seat is held in place by four retaining bolts. Remove the retaining bolts and the seat will come off.
The seat on a Yamaha BW80 motorcycle is removed by taking out the retaining screws under the lip of the seat. It can then be raised up and detached from the hinges.
Remove a bolt (hex) from either side at the bottom of the seat. Near the shock.
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
key unlocks top section(pillion) which exposes nuts at the rear of main seat. unscrew and slide seat backwards, this will remove the seat.
Yes, you may remove the back seat saddle bags and visor from a 1988 Yamaha. You will need to unscrew the bolts attached to the back seat and visor.
It is under the seat toward the front of the seat and rear of the tank. Remove the drivers seat to get to the battery. It maybe be necessary to loosen th tank in several spots to lift the tank slightly. On the Yamaha r1 2004-2008 you have to lift the tank as well to get it out. Good luck!
how to remove 2004 scion back seat
To remove the seat on a Yamaha Vino, locate the seat latch under the rear of the seat. Pull the latch upward while simultaneously lifting the back of the seat. Once the latch is released, the seat will detach from its hinges, allowing you to remove it completely. Be sure to check for any additional fasteners or clips if applicable, depending on the specific model year.
remove bolt on the back of passenger seat, pull that back and out. Then driver seat just pulls back and out as well.