No, they are totally different
get a clymer manual for torque specifications.
Rebuilding an ATV top end takes some knowledge of engines. Check out my bio page for help.
No, the pinions do not turn in the same direction
yes there is it is a big nut on the rear of the rear end
An oil pump on a 1994 Honda Civic is found in the bottom end of the engine. To replace the oil pump the engine will require a rebuild as the crankshaft will have to come off as well.
depends on if your doing the top or bottom end. TOP END: about 200 bucks if you do it yourself about 400 to have it done BOTTOM END: about 350 do it yourself about 450 have it done. email me with any questions peewadin@aol.com
Take her apart and rebuild that somebitch!
Depends. If you are rebuilding the bottom end . Wiesco has a bottom end rebuild kit . I dont know how much . But if you are rebuilding just the top end . You can find top end rebuild kits for pretty low . About 90 dollars.
To rebuild the top end of a Honda FourTrax, first, remove the seat and plastic covers to access the engine. Drain the oil and coolant, then detach the cylinder head by removing the necessary bolts and components, including the carburetor and exhaust. Replace the piston, rings, and any gaskets or seals, ensuring proper clearance and alignment. Finally, reassemble the engine, refill with oil and coolant, and check for leaks before testing the vehicle.
Remove the two Allen bolts at the rear end of the seat with a hex wrench, then slide it back.
Remove the two Allen bolts at the rear end of the seat with a hex wrench, then slide it back.