To fix the pull start on a Baja Doodlebug racer, first ensure the engine is cool and remove the cover to access the pull start mechanism. Check for any frayed or broken cords; if damaged, replace the pull cord by winding new cord onto the reel. Ensure the spring mechanism is functioning properly and reassemble the cover, ensuring all bolts are tight. Test the pull start to ensure it operates smoothly before riding.
What you want to do is start off goin about 10 miles per hour and then pull back and floor it
Pull start only
pull apart the carborator and clean it of dirt and debris pull apart the carborator and clean it of dirt and debris
i don't think you can you will need to bye a new pull start or pull the cover of and find a piece of line that will go around the pully so you can start it
i have an 05 it is electric and pull start
kick start, electric start, pull start
It depends on if you bought a pull start mower or a power mower. The pull start mower will have a handle you have to pull hard to start it. The power mower should have a button that simply turns it on. Make sure there is gas in the pull start mower.
If you haven't already, try racer back bras or halter bras and/or tops. Also try a good push-up bra with side padding might pull your boobs together and show cleavage.
use the kick start
repair the pull start ?
it depends because if it's a kick start you turn your choke then kick the start and if you got a pull start the you turn the choke and pull it a few times. :P
most quads are key start so they use a key to start them and are called electric start quads and some quads use a pull start to start like a push lawnmower and are called pull start quads