I have never done this before but i think that yes! It should be fit.
No it will not without modding the bottom end
80 to 85 ft lbs 80 to 85 ft lbs torque to 40 first starting at center and stagger tightening bolts side to side ,each bolt till you reach the outer ones then tighten to 80 to 85
yes it will fit.
so of them will
NO
Operating temperature: 80-85 deg Cent
Any smallblock Chevy engine will physically "fit" into a 85 Impala
It is: 85% of 80 = 68
nope, the 85-86 motor is angled, the 87-92 are not. and the cylinder mapping is different as well.
Any of the seats from the 80-85 model years should work.
85 - (15/100 x 80) = 85 - (0.15 x 80) = 73
it is out of a pass car between 80-85