Motorcycle seats are as a rule not adjustable. They sit right on top of the frame, so there's not really a lot that can be done. An upholsterer can remove some of the padding and cover the saddle back up, but that's about it.
Seat height is the seat And overall height is to the tallest point on the bike, like the bars
To adjust a bike seat height, first loosen the seat clamp bolt underneath the seat. Then, raise or lower the seat to your desired height. Finally, tighten the bolt securely to hold the seat in place.
To measure a bike's height accurately, stand the bike upright and measure from the ground to the top of the seat post. This measurement is the bike's height.
The optimal height for a bike seat is when your leg is almost fully extended at the bottom of the pedal stroke. To adjust for maximum comfort and efficiency, the bike seat should be set at a height where your leg is slightly bent at the bottom of the pedal stroke.
To set the height of your bike seat correctly, stand next to your bike and adjust the seat so that it is at hip height when you are standing next to it. When you sit on the seat, your leg should be almost fully extended when the pedal is at its lowest point. Make sure the seat is level and secure before riding.
To adjust the seat height on a bike, locate the quick-release lever or bolt on the seat post. Loosen the lever or bolt, raise or lower the seat to the desired height, and then tighten the lever or bolt securely. Make sure the seat is at a height where your legs can fully extend when pedaling.
To adjust the height of your bike seat, locate the quick-release lever or bolt on the seat post. Loosen the lever or bolt, then raise or lower the seat to your desired height. Tighten the lever or bolt securely to hold the seat in place. Test the height by sitting on the bike and adjusting as needed for comfort and proper leg extension while pedaling.
33.1 inches (840mm) is the seat height for this bike.
The most comfortable seat option for a stationary bike is typically a wide, padded seat with cushioning to provide support and reduce pressure on the sit bones during long rides. Look for a seat with adjustable height and angle to customize the fit to your body.
On most quads there is a lever that unlocks the seat, then it slides back and up.
The recommended seat height for a 58cm bike frame is typically around 30.5 to 32 inches from the ground to the top of the seat. Adjusting the seat height to this range can help ensure a comfortable and efficient riding position.
To adjust the height of a bike seat, locate the seat post clamp and loosen it using a tool like an Allen wrench. Raise or lower the seat to your desired height, then tighten the clamp securely. Make sure the seat is level and comfortable before riding.