yes the 89 cr 250 is hard to start, i have found that if you change the brand of oil that you mix it messes up even more.
it depends what its doing, yes mixing different brands of oil screws it up but not as much as u think because its oiling the piston no matter what, just burning different. I have an 89 cr250r, and i have a similar problem, but i just changed piston and rings, along with the gasgets, now it works fine, i sugest since its giving you problems, i sugest doing wat i did, oh and if its cold out its gona be hard to start, oh and make sure ur carb is clean along with a working choke...it helps trust me.....oh and im kinda stumped at the moment with my bike the kicker is acting funny and i looked over everything couldn't find anything, it cranks but doesnt move the piston...like turn over, but then it catches and works, like i don't know i might of striped the crank or somthing, but its new, well any way for u i sugest a new set of rings, gaskets, and a new piston i prefer pro-x pistons....way better than wiseco.
crank no start hot weather1991 Honda accord no start hot . but will start for a second with starting fluid . not getting fuel
It's out of gas.
its in the front of the transmission, just left of the center of the car. its hard to see.
Nothing as they are traditionally hard to start. Make sure you have the bike in neutral before attempting as that does make it easier. Type your answer here...
honda cbr 150 r suddenly stop and hard to start .
has it been running before you try to start. it is overheating or you have a bad starter.
Most likely your auto choke is not working properly.
hi! cold start valve.
car stalls backfires hard to start
It's hard to say, as the question didn't specify what kind of solenoid are you attempting to fit, and the 1990 Prelude had a mid-cycle refresh which included an improved motor.
its in the radio , you need to push the power really hard. to clear the codesand then start it.
Hard Drivin' - 1989 VG was released on: USA: April 1989