On my Bear Whitetail Hunter there are 3 slots on both the top and bottom pulleys that the cable sits in. One center, and on either side the others are marked with a plus or minus. It is my understanding that you need to put the bow in a press and move the cable position to the desired slots (plus to lengthen, minus to shorten). I am in the process of shortening the draw length of my own. As far as the range of length adjustment or whether both pulleys need to be in the same slots I am not sure. Hope that this helps somewhat. Happy shooting. Jake.
The old Bear white tail hunter uses a dacron string, the length is marked on the lower limb.
Bear Whitetail Compound Bow is adjustable in 5# incraments minimum is 45# maximum is 65#
The Bear Whitetail Hunter bow can shoot up to 340 fps and it has offset string suppressors to make it less noisy. It also features quad limbs for a vibration free release.
how much is a whitetail classic bow wourth
black bear
My owners manual shows 1997, Bear whitetail supreme Xlr, 28-30 inch draw, 70 pound draw weight
38"
mine is 35"
Bear Hunter died in 1863.
there are two Allen wrench screws on the limbs of the bear bow as there is on most bows,one on each limb. losen them and the poundage is lowered tighten them and it is raised. be careful not to tighten all the way this will cause breakage.
black bear, whitetail deer, raccoons to name a few.
the poler bear is a hunter is cant be hunted or you will get a fine because they are endangered animals.