It's a U-brake
No it's pointless unless you have a race bmx which doesn't have a front brake anyway
clean rims with rubbing alcohol and brillo pad/scotch briteget new brake padshave a look at your cabling, cables and cable sheaths should be as short as possible while still making smooth bends.
its good for the price and the frame is strong but the brakes are weak
You buy bicycle brake cables, either from a bicycle store, or from an internet source. If you need to be told this you probably need to be told how to install them as well, so go look at www.bicycletutor.com, www.parktool.com or www.sheldonbrown.com
most bmx bikes dont have front brakes now ans if you pedal backward and it has pedal brakes its not a bmx bike
i dont think so. im quite a bmx enthusiaste. but id dont think that was many bmx girl riders until now. there now starting to come in to the sport
Pull your front brake or put your foot in the backk of the tire.
It's a thing that sits below the handlebar and is connected to the brake wires. WIth a gyro you can turn the handlebar a full turn w/o the brake wires getting all tangled up.
if this is about a BMX - then no. The distance from the pivots to the brake track on the rim is wrong. The width may be off too.
Too many steps to answer here, go to www.parktool.com, www.sheldonbrown.com or www.bicycletutor.com for more.
I dont know ask jeeves :)