0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you remove a Nissan 240sx door?
Open the door, pull the pin from the stopper between the two hinges and undo the four bolts on the hinges, thats it
How do you remove front door?
remove the pins from the hinges there is probrably a clip on the bottom of the pin
Your diver side door is loose and uneven How can you tighten the door to prevent it from falling off?
Need to know what model and year vehicle you have but your local auto parts store can sell you a door hinge pin and bushing kit to rebuild the worn hinges on most vehicles. Rebuilding the hinges will align the door back where it belongs unless it has been damaged from an accident.
Adjust door on s10 to close tighter?
You can adjust the striker pin on the door post with a torx socket. Also, if there is too much slop in the door hinges that can cause problems. The hinges can be repaired with door hinge pin and bushing kits from your local auto parts store.
Can the ignition barrel come loose?
yes if the shear pin / retainer pin is removed
What type of hinges should I use on kitchen cabinetry?
semi concealed cabinet hinges should be used if half the hinge is visible on the face frame and the other half is hidden behind cabinet door, surface mounted hinges are for the cabinets where the whole hinge is visible from the front of the cabinet, over lay hinges show the hinge pin from the front of the cabinet, and pivot hinges are for the pivoting cabinet doors.
How do you replace a door hinge on a 2002 Chevy S-10?
BIG JOB! The original hinges are welded in. They do sell pin and bushing kits to restore the original hinges, much easier to do than replacing the whole hinge.
What would cause a knock in your lower end above your oil pan on a 96 Dodge 318?
Rod bearing, cracked piston, loose wrist pin, etc.Rod bearing, cracked piston, loose wrist pin, etc.
Were can you buy door hinges for a 1990 s10?
that's easy i had the same problem i got it from home depot, you can also get it from Rona, Canadian tire or home hardware the price is actually not that bad too Replacing both halfs of the door hinges on that 90 S10 is a big pain in butt job. Consider purchasing pin and bushing kits and restore your present hinges on the vehicle. Pin and bushing kits are available at your local auto parts store.
How do you replace the hinges on a 1999 S-10 4.3?
In most cases you can restore the hinges with replacing the pins and bushings. Pin and bushing kits areavailable from your local auto parts store. If you need to replace the complete hinge it would require an extensive amount of work. The original hinges are welded in place to the door and the body pillar.
What are the most popular pin art artists?
There are a variety of various popular pin art artists. Some popular pin art artists include Earl Moran, Enoch Bolles, George Petty and many other artists.
Is it possible to have a triangle with side lengths 3.5cm 4.5cm and 7cm?
yes Cut a string 15 cm ; pin one end ; swing around the loose end and pin it at 4.5 cm ; pin again 3.5 cm beyond that ; now make an angle with the 7cm loose end dangling; pull the loose end toward the first pin and adjust the angles till they touch. That's how I tie my shoes.
