Timing is done by Engine computer with imfo from cam and crank sensor . It is not adjustable. If you are replacing timing belt, a Gates timing belt comes with detailed instructions of belt and pulley timing marks. New belt has marks on it that correspond with cam shaft pulleys and crank pulley.
belts
looking for the timing marks corsa c 1.2 16v
You are changing the timing belt and you need o know where the timing marks are for the cam shaft and the crankshaft on a 1994 corolla Also how do you align the marks to put engine in time?
The timing belt marks on a 1994 Honda Civic are found on the cam shafts. The arrows will needed to be point a TDC in order to install the belt properly.
Yes , a cam belt and a timing belt are the same thing
for the cam gears its right on the upper timing belt cover plate, and for the crank, theres a mark on the crank collar
I have never heard of a cam belt, but a timing belt does drive the cam or cams
The marks are on the cam and crank sprockets, and on the timing belt. They all must match.
My honda passport 3.2 litter, to set the timing my belt has three timing marks on the outside of the belt, crank the motor over till you see the two belt marks towards the top of the cam shaft or around thier if one is at top the other cam can not be seen so botn cams have to be tilted set both belt marks to the cam shaft marks. When the belt comes off dont get the cams out of phase they tend to unwind a bit, put back. A nd the crank shaft has a green timing mart on it after you pull off the pulley and cover, so match the other timing belt mark on the belt to the crank shaft mark then put the tensioner back on now it is on dead set timing.
it is auto timed thru the cam shaft and crankshaft sensors.You cannot change it. The timing belt has timing marks when you change the belt in which you line up the crank and cams.
how to set the timing marks on a single cam dodge neon