Begin tightening by rotating nuts clockwise, choosing one bolt first, then choosing the bolt 180° opposite second. then one at 90° and then the one 180° from that. Then step over one nut from the first nut tightened (decide for yourself clockwise or counter-clockwise) and continue the same pattern as with the first four. .... Number the flange clockwise with this sequence: 1, 13, 25, 9, 17, 5, 33, 21, 3, 15, 27, 11, 31, 19, 7, 35, 23, 2, 26, 10, 30, 18, 6, 34, 22, 4, 16, 28, 12, 32, 20, 8, 36 & 24. Now tighten in the criss cross pattern using the numbers. continue to increase torque and go through the pattern until you reach your final torque.
28
In this sequence, it should be 27, not 28 (28 is not divisible by 3)
28
To find the 8th term of the sequence with the rule 3n + 4, you would substitute n = 8 into the formula. This gives you 3(8) + 4 = 24 + 4 = 28. Therefore, the 8th term of the sequence is 28.
44
7 10 16 28
The next numbers in the sequence are... 16, then 88.
-100
2
A sequence never ends. The next number in this one is 7 .
The given sequence (7, 14, 21, 28, 35,....) is an arithmetic sequence where each term increases by 7. The nth term of the given sequence is 7n