45°
I found this information for the Taylor Made Burner XDs. * #4 (21-degree loft; 61.5-degree lie angle; 6.7mm offset) * #5 (23-degree loft; 62-degree lie angle; 6.3mm offset) * #6 (26-degree loft; 62.5-degree lie angle; 6mm offset) * #7 (30-degree loft; 63-degree lie angle; 5.7mm offset) * #8 (34-degree loft; 63.5-degree lie angle; 5.3mm offset) * #9 (39-degree loft; 64-degree lie angle; 5mm offset) * PW (44-degree loft; 64.5-degree lie angle; 4.7mm offset) * SW (49-degree loft; 64.5-degree lie angle; 2mm offset)
most wilson Pitching wedges have about a 56 degree loft with a medium or 10 degree bounce loft
Loft may range from 19 degree to 60 degree depending on the specs of the iron.
The utility club, or rescue, or Hybrid is there to replace your long irons. That's why you see them marked as 3h - 4h or 5h that is to designate the iron it's replacing. The hybrid is the same length as your iron or just slightly longer. but it should be the same degree of loft. Hit it as you would your long irons, they are more forgiving, easier to hit, and better out of rough. Fairway woods have bigger heads and generally quite low lofts from 13 to about 23 or so. They also have longer shafts.
It completely depends on manufacturer but the majority of Pitching wedges have 46-48 degrees of loft.
Yes, a driver can have 13º of loft, but then it basically becomes a 3 wood with a larger head.
If you are buying him a driver or fairway wood the best thing to do is ask him, because I cannot tell you what loft is ideal for his ball flight or what he prefers. You could have a quick look in his bag and see what loft he uses and then get a replacement. If he doesn't know you could get him custom fit at your local golf shop, this is an inexpensive process but has clear benefits.
9 wood or 5 iron
A number 1 iron typically has a loft of around 16-18 degrees.
46 degrees. Also the A wedge is 51 and the sand wedge is 55.
About 23-24 degrees, depends on manufacturer.