0
Add your answer:
Earn +20 pts
How do you tighten the alternator belt?
What kind of car? On an older car you just loosen the alternator and pull it until the belt is tight and then tighten the bolts back. On newer cars, there is a tensioner that pulls the slack out of the belt.
How do you tighten the belt on 1990 Pontiac tempest?
If this Pontiac Tempest is the same car as a Chevy Corsica, and it has a v-6, it should be automaticly tightened. If it wont tighten, you might check to see if it has the right belt, If it is the right belt, it could be the automatic belt tensioner.
What is the cause of squaling when the car accelerates?
usually the squealing is from the alternator or the alternator belt in most cases it is the belt try to tighten it or replacing
How do you tighten fan belt on Mitsubishi L200?
how do you tighten fan belt on l200
Can leak from water hose cause slipping belt?
I is possible. It may just mean you need to tighten your belt. Your car should have a belt tensioner which you can use to tighten the belt until the stops slipping or buy a new one. Newer ones always have better traction.
How do you tension a belt?
if the car doesn't have an automatic tensioner than if the belt is around the alternator pully you loosen the bolt holding the alternator on and move the alternator to tighten the belt.
How tight to tighten serpentine belt?
Your car most probably has an automatic belt tensioner that keeps the belt tight and in proper spec. If the belt has too much play in it, the belt tensioner will need to be replaced.
How do you tighten the fan belt on a peugeot 205?
just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt
How do you tighten a loose drive belt?
To tighten a loose drive belt, find the pully that is connected to the belt. Tighten the pully and then hold the belt in place using the adjuster belt. Check out the related video to see an example of how this is done.
How do you tighten belt on kawasaki brute force?
how do u tighten belt on brute force 750?
How do you tighten fan belt rover 214?
You can tighten a fan belt by tightening the tensioner pulley. Pry to the left on the tensioner pulley and tighten it.
What is the constant squeaking noise coming from the front part of the car?
the belt on the engine is loose, so you want to see if you can tighten it or get a new belt . i hope this helps
