open bolt,pull trigger,bolt should slide right out
Can i get the bolt (bolt action) in order to clean the gun. Please answer omsg777@hotmail.com
codey
Clean it thoroughly.
Contact Browning Customer service through their website, and request an owner's manual.
Move the safety forward to the 'fire' position, then open the bolt. As you are sliding the bolt to the open position, pulling the trigger will allow the bolt to be removed.
To remove the bolt on a British Enfield: Open the bolt and pull to the rear as far as possible. Grasp the protruding part of the bolt face and rotate it upward. Pull the bolt out while pressing the trigger. I don't recommend disassembling the bolt.
To clean a Marlin bolt-action .22 caliber rifle, first ensure the firearm is unloaded and the bolt is removed. Use a cleaning rod with a patch or brush soaked in a suitable gun cleaning solvent to scrub the bore from the chamber to the muzzle. Wipe down the exterior with a cloth and apply a light coat of gun oil to prevent rust. Finally, clean and lubricate the bolt and any moving parts before reassembling the rifle.
Best to ask a gunsmith for help
14ft lbs ea. according to the Toyota service manual it is 58 ft/lbs this for clean dry bolts make sure also to clean out the bolt holes in the engine block before assembly
To rethread a bolt effectively, first ensure the bolt and the hole are clean. Use a thread tap to remove any damaged threads. Slowly turn the tap clockwise into the hole, then back it out to remove debris. Test the bolt to ensure it fits properly.
With MOST bolt action rifles, empty the weapon, check that it is clear, take safety off, open the bolt, draw to the rear, depress and hold trigger, and bolt can be withdrawn. A few require the trigger be pushed forward.