To add coolant to a Suzuki Raider 150, first ensure the engine is cool to avoid burns. Locate the coolant reservoir, which is usually near the radiator; remove the cap and check the fluid level. If it's low, add the appropriate coolant mixture (usually 50% coolant and 50% distilled water) until it reaches the recommended level. Replace the cap securely and check for any leaks before starting the engine.
you add coolant to e150 thru the radiator overflow bottle
To check the coolant level in a Suzuki C109R, first ensure the motorcycle is on a level surface and the engine is cool. Locate the coolant reservoir, typically found near the right side of the bike. Check the transparent markings on the reservoir to see if the coolant level is between the "MIN" and "MAX" lines. If the level is low, add the appropriate coolant mixture until it reaches the correct level.
To add antifreeze to a 2007 Suzuki Forenza, first ensure the engine is cool and locate the coolant reservoir, typically found near the front of the engine bay. Remove the cap from the reservoir and add a 50/50 mix of antifreeze and water, filling it to the "FULL" line. Replace the cap securely and start the engine, allowing it to run for a few minutes to circulate the coolant. Check the level again and add more if necessary.
how to add coolant to 1991 lumina?
add more coolant. if it is still set up for r12 buy a r134a conversion kit at parts store.
The overflow resavour is where you add coolant
You add coolant to a C240 at the radiator overflow tank. This allows the radiator to suck in coolant as needed when hot.
the new tomb raider game after tomb raider underworld is called tomb raider underworld beneath the ashes i checked it showed me a trailer if you have yahoo go on the Google thing and type Lara croft tomb raider so that is the new game for 2009This Is A Game Add On Its Under Game Add Ons On The Microsoft Xbox 360 (it has extra levels to play)
can I add trasmision fluid on suzuki forenza 2008
To check the coolant level on a 2003 Suzuki VL800, locate the coolant reservoir, which is typically found near the right side of the bike. Ensure the engine is cool, then visually inspect the coolant level through the reservoir's transparent markings. The level should be between the "Low" and "Full" marks. If necessary, add the appropriate coolant mixture to reach the proper level.
no cap, just the coolant tank, add to this to add coolant../
You should not mix colors or brands of coolant.