0
Take the whole engine apart, heads, pan, crankshaft, pistons, put sleeves in put everything back together. Its much harder than it sounds lol. Costly!
Add your answer:
Earn +20 pts
Why did the sleeve valve engine disapere from car engines?
To increase compression. Sleeve valves take a lot of combustion chamber space.
What is the difference between a wet sleeve and a dry sleeve in a diesel engine?
Dry sleeve is pressed fit into a cylinder and it does not contact with water.It is very thin. Whereas, wet sleeve is pressed fit into a cylinder and it contacts with water jacket.It is very thicker.
Should i put a sleeve in a cracked engine block that's into a water jacket?
depends on what your using engine for but no i would not recommend it
What is a pagoda sleeve?
A pagoda sleeve is a funnel-shaped sleeve arranged to show the sleeve lining and an inner sleeve.
What are the two parts of a celinder in the car engine?
Presuming that you mean "cylinder", the two parts are the bore and sleeve.
How do you remove an engine sleeve?
I have made a couple different sleeve pullers an it depends on what typeof sleeve you are trying pull if it is a wet sleeve like for a cat engine where the sleeve rides below the block the best way to make one is out of 1/2" flat steel an cut it out in a "T" shape an turn the "T" upside down an make it so the cross on the Tprotrudes out of the sleeve by at least 1/8" an drill a hole in the top of the leg so you can put a clevis in it. Then put a short piece of chain on. an weld a bolt to the other end an bridge over the top on the block an tighten the bolt an it should pull up the sleeve An if it bends the "T" you might have make it more of a triangle shape An if it is a dry sleeve like in a old tractor you will need cut one out in a circle that will just go inside the block an catch the sleeve drill a hole in the middle of the plate an use the chain an bolt good luck
What are the basic types of sleeves in garment making?
THE THREE BASIC TYPES OF SLEEVES ARE : KIMONO SLEEVE RAGLAN SLEEVE SET- IN SLEEVE THE THREE BASIC TYPES OF SLEEVES ARE : KIMONO SLEEVE RAGLAN SLEEVE SET- IN SLEEVE THE THREE BASIC TYPES OF SLEEVES ARE : KIMONO SLEEVE RAGLAN SLEEVE SET- IN SLEEVE
What are the Types of sleeve?
The types of sleeves are: no sleeves,spaghetti strap (thin or thick), short sleeves,3/4 sleeves, and long sleeves.there is also bishop sleeve, lantern sleeve, shirred sleeve, bat-wing sleeve, saddle sleeve, french sleeve
What is tat sleeve?
Tat sleeve
How do you fix a damaged cylinder?
if its an engine cylninder jus pick up a 2nd hand engine itll be cheaper than fittin a cylinder sleeve and that's if the engine even has removable sleeves, some don't
What is the plural of sleeve?
The plural of sleeve is sleeves.
Is there a belt diagram for 1985 gm van?
It is usually in the engine compartment. If not, many of the new belts have the diagram on the cardboard sleeve that they come in.
