sexy question
To measure a nipple bar, you would typically use a caliper or ruler to determine the length of the barbell shaft between the two ends that secure the piercing in place. Make sure to measure in millimeters for accuracy and note the gauge size of the barbell as well.
Cut the nipple with a hacksaw blade from the inside in 4 cuts, top bottom and both sides BE careful not to cut into the threads of the female end so you can reuse this piece. Break out the nipple with a pair of pliers.
In such situations seek medical advice as soon as possible.
You insert the correct size wrench into the pipe and as you unscrew it, a cam grabs the inside and hopefully unscrews the nipple. It may break also. Most pipes are rusted too tight for an internal pipe wrench to loosen them. What you can do that takes a little time is insert a hacksaw blade in the nipple and cut a notch through the nipple. This relives the pressure on the nipple. Tap around the edge with a screwdriver or chisel and then try the wrench. For extremely rusty pipes, cut the nipple in 3 places and knock out the pieces.
If it has always been like this it is normal for her and she should have no problems, either now or when tryiung to breastfeed a baby. The baby 'latches on' outside the areola (the dark bit) and its sucking will bring the nipple out. However if the nipple has only recently gone in then she should see a doctor as it can be a sign of a problem.
A nipple is a nipple, simple as that. The sometimes darker // pinker skin around the nipple is called the aureole.
The nipple is lateral to the sternum.
You can get it done again once you're sure the piercing is healed inside as well as out.
nipple bras.
Yes, each normal nipple has multiple openings.
That you decided to get a nipple piercing.