Any 608 skateboard bearing or 688 bearing with adaptor.
no. you can get up to abec 13s and bearings like bones ceramics are really fast.
It is the a part that gosse in the hole of the wheel and makes it spin longer and faster there are diffrent types of bearings and abec is a raiting used and also abec 3 bearings can be faster than abec 5s it really doesnt make a difference its mainly its durrability
oem is 75.6mm 14 flutes but 76mm wrench also fit it.
the wheel bearings are press fit bearings you need to pull out the drums and take them and the new bearings to a machine shop they can press them in a few minutes and fairly cheep to do
They are a press fit
For the most part they should, unless the trucks say it needs 10 mm bearings then it will fit. Most trucks use 8 mm bearings.
yupp yupp
yes
Flywheels are fitted by engine and crankshaft pattern. Not bell housing diameter
Yes, any skate can take either bearing but you need to have the right type of wheel and spacer per bearing. ie, if you have mini bearings you need mini hub wheels and spacers that fit the mini bearings. If you have standard bearings you need standard hub wheels and spacers that fit the standard bearings.
It should fit as long as both engines are the 3 cyl 1 litre types, but you will need to swap flywheels.
You end up with a sloppy fit between the bearings and the crankshaft.