Tear strength involves only individual threads in a garment to be broken. Breaking strength involves all of the weave to be broken.
The breaking strength is always greater than the yield strength.
Paracord has a breaking strength of around 550 pounds, making it stronger than most types of cordage like nylon or polyester ropes.
HDPE has higher density therefore it has greater tensile strength
Tensile strength is the maximum amount of stress a material can withstand before breaking, while ultimate tensile strength is the highest stress a material can handle before fracturing. Ultimate tensile strength is typically higher than tensile strength, as it represents the material's absolute breaking point. In measuring a material's ability to withstand forces before breaking, ultimate tensile strength provides a more accurate and reliable indication compared to tensile strength.
Median signal strength is a number such that the actual signal is higher than that number 50% of the timeand lower than that number 50% of the time.
The dynamic breaking strength of a wire rope can be calculated by multiplying the static breaking strength of the wire rope by a safety factor suitable for the dynamic loading conditions. Typically, the safety factor for dynamic loading is higher than for static loading to account for the dynamic forces and vibrations that the wire rope may experience during operation.
Yield stress is the point at which a material begins to deform plastically, while tensile strength is the maximum stress a material can withstand before breaking. Yield stress is lower than tensile strength. In the context of material strength, yield stress indicates the point at which permanent deformation occurs, while tensile strength shows the maximum stress a material can handle before failure.
a tiger because it's bigger and it has more strength. it would tear the coyote to shreds and eat it in less than 10 minutes!
Lighter weight and more strength than other metals.
Eris has a gravitational field strength of about 0.8 m/s² which is lower than Earth's, due to its smaller mass and size.
sulphuric acid is a stronger acid than carbonic acid. lower pH defines strength of acid.
The tensile strength of iron is typically around 370 MPa. This is higher than materials like aluminum and copper, but lower than materials like steel and titanium.