0
What else can I help you with?
What is the structural member of a boat that runs longitudinally along the centerline of its bottom called?
The keel is the main structural member running fore and aft on a boat.
What is plate keel?
A plate keel is the longitudinal structural member at the bottom of a ship's hull that runs along its centerline. It provides strength and stability to the hull by distributing the weight of the ship and resisting bending forces. The keel also helps to prevent the ship from rolling excessively in rough seas.
How deep to put rebar in concrete?
It depends on the structural element in which the bars are being placed. In a footing, it is 3" clr of the bottom of the ftg. In a slab, it can be centered in the slab or located towards the top or bottom. Details and sections shown on the structural drawings or general notations or specifications by the engineer of the projects record should clarify the exact location the bar is to be placed.
What is the name of the bottom of the boat?
It's called the bottom. The keel is a structural member that runs fore and aft and supports the frames (ribs) to which the bottom and side plating are fastened. Inside the boat it is also called the bilges.
How do you work out the flat dimensions of a cup sleeve?
measure the Circumference of both the top and bottom edges of the sleeve. measure the height of the sleeve. using a centerline draw the first Circumference(kinda of like a lower case "T") measure down the height of the sleeve along the centerline, draw in the other Circumference. connect the endpoints on the left then the right. you now have a flat drawing from which to measure your dimensions, area, etc.
What are structural cues?
structural analysis help the student identify phonics (letter sound associations).
How curtailment is done rcc beams?
in case of beam bottom most fiber taking bending stress and stress gradually decrease toward supporting members longitudinally. so that curtailment can be done by analysis cross section of the beam and can be determined steel required particular section.
How do you measure the frame of a bike accurately?
To measure the frame of a bike accurately, use a tape measure to determine the distance from the center of the bottom bracket to the top of the seat tube. This measurement is typically in centimeters and is known as the seat tube length. It is important to measure along the centerline of the tube for accuracy.
What force is exerted on the bottom row of bricks in a building?
The force exerted on the bottom row of bricks in a building is a combination of the weight of the bricks above and any external loads such as furniture or people. This force is distributed across the entire bottom row of bricks to support the weight and maintain the structural integrity of the building.
How to measure the frame of a bike accurately?
To measure the frame of a bike accurately, use a tape measure to determine the distance from the center of the bottom bracket to the top of the seat tube. This measurement is known as the seat tube length and is typically expressed in centimeters. It is important to measure along the centerline of the tube for accuracy.
What is in English for Telugu word gadapa bottom most portion of door frame?
In English, the Telugu word "gadapa" refers to the "threshold" or "bottom sill" of a door frame. It is the horizontal piece at the bottom of the door frame that serves as a base for the door to close against. This part helps to seal the space and can also provide structural support.
Can you install a dog door by cutting from bottom of the door or should there be a space?
You should leave a space. Most pet doors instruct this, and will have a piece across the bottom intended to settle into the existing door. Cutting from the bottom of the door severely compromises the structural integrity of the door, as well, and may cause eventual splitting or other damage to the door.
