I have 05 with no brake lights
the switch is on top back side of brake pedal.
The brake light switch is broken or out of adjustment. The brake light switch is attached to the brake pedal lever above the brake pedal pad.
just behind the leg on the brake peddle
Brake switch is bad. It should be at the top of the brake pedal under the dash.
To change the brake light switch on a 2004 Audi TT 3.2, first disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is typically mounted on the brake pedal assembly. Remove the electrical connector from the old switch, then unscrew and remove the switch itself. Install the new switch by reversing the process, ensuring it is securely fastened and reconnect the battery.
Under the dash, near the top of the brake pedal arm.
It is mounted on bracket just above the brake pedal.
How to change the brake switch on a 2004 Jeep grand Cherokee Laredo
To check the brake light switch on a 2004 Hyundai Tiburon, first, locate the switch, which is typically mounted on the brake pedal assembly. Disconnect the electrical connector from the switch and use a multimeter to test for continuity; the switch should show continuity when the brake pedal is pressed. If there's no continuity, the switch may be faulty and should be replaced. Additionally, inspect the switch for any signs of damage or misalignment.
replace brake light switch located on brake pedal under dash
2004 cadillac cts sport switch don't work