Try putting the key in the drivers door and locking it manually after you close the door. If you have a custom alarm then you have to play with the alarm button.
The door lock rod in a 1990 wrangler, is assembled with a locking pin on each end of the rod. The locking pins connect the rod to the locking mechanism.
I think this is a safety measure to keep you from locking your keys in the car. Try locking it with the key after the door is shut.
The interior door handle on a Hyundai latches onto the locking mechanism of the door. First remove the old handle by unscrewing it from the door panel. Pull the handle out and remove the locking wire. Install the new unit with the locking mechanism in place. Tighten the mounting screw.
2nd Drivers door motor will need to be added in addition two relays that will be controlled from lock-unlock pulse from alarm module or after market module. Relays also feed power to door motor.
Door Assembly
Corey Fields
No
inside the locking unit in the door is a plastic screw jack that breaks. it can be repaired easily if you can trace the part. easy fix Simon
There are certain specialty shops that will allow you to put a custom message. Simply peform a web query with the terms custom door mats.
There are many different types of GE refrigerators available on today's market including French Door, bottom freezer, side by side, top freezer and the small refrigerator.
first open door or if its already open, pull inside door handle while prying up on the actual locking mechanism it should move up into where it should br