Depends on what make and model vehicle it is in. Park the vehicle on a level surface. Drain the oil and change the filter. Add 4 quarts of the correct weight oil, start the engine and let run for 2 minutes. Shut down and wait 30 minutes and then check the level. Add as necessary to reach the full mark. You now know the capacity.
38 - 46 quarts, depending on what the engine is.
as much as it takes to fill it up dummy
There is no transmission oil, its what is considered a wet clutch the engine oil lubricates the clutch, 2 quarts will fill the engine oil.
in the top of the engine there is a cap with an oil can sign on it . Fill the oil in there. Be care not to over fill as it can cause the engine to cease!
3.4 to 4.4 litres. never over fill, it can damage the engine. fill engine up to the full line on the dipstick and no further.
6 qrts
i believe it is about 8 quarts to flush and fill the system. i believe it is about 8 quarts to flush and fill the system.
4 quarts of oil, providing that you changed the oil filter too.
Any shop does not bother because it takes extra time to pre-fill the oil filter , but I always liked to do that if I was changing the oil ( just remember to pour that much less oil into the engine )
Use dipstick as a guide. Fill to proper level when engine off after it has settled/drained back to the pan.
cap that covers the oil fill hole in engine
4.25 qts