0
Add your answer:
Earn +20 pts
Is vegetative roof a dead load or live load?
Although it's counterintuitive, the saturated soil and vegetation are considered a dead load.
What is the difference between a streams suspended load and its bed load?
The difference between a suspended load and a bead load is a suspended load consists of the small particles or rock materials that are dispersed throughout the water and easily carried downstream. The bead load consists of the larger particles that are dragged and bounced along near the bottom of the river.
Where in a river from top to bottom can you find dissolved load suspended load and bed load?
Bed load will be the heavier stuff that will soon fall out of the flow - boulders, gravel, large grains of sand. Suspended load is the finer stuff that the flow can carry further, even as far as the sea, deposited as sand, silt and mud. Dissolved load is the chemicals that will remain in the water until mixed with salt water and become dispersed in the sea.
What does it mean to have structural integrity?
In buiding, structural integrity means the stucture can support the weight of the load and hold together under the load. For example, if a building has structural integrity, the walls can support the load of the rafters and roof.
Can an upstairs floor hold the 150kg weight of a Punch Man?
A well built floor in good condition should cope with a 150kg point load. This is no more than some pieces of furniture or even some people weigh. Also, a "Punch man" is "dead load, which means the weight is not moving (that is called a live load). A live load puts more load onto the building, because it has forces of acceleration beyond that of gravity.
When was Take a Load Off created?
Take a Load Off was created in 2010-06.
Zimsec 'O' level inter science syllabus 2010?
What is dependance load
What is tire pressure for 2010 Mazda 6?
on mine (2010 '6) I have 2.2 on all 4 - normal load 2.4 front and 3.0 at the back on full load. (Mazda6 2L Turbo Diesel Combi (Break))
What gas mileage does a 2010 ford diesel motor get?
I have a 2010 ford regular cab pickup, 4x4 diesel and I get 11.9 mpg. daily driving with no load in it.
Can you load a backup from another computer Quickbooks 2007 to Quickbooks 2010?
Yes. QuickBooks is forwards compatible (meaning you can upgrade your file from 2007 to 2010). However, it is not backwards compatible (you cannot go from 2010 to 2007).
Why is Six Flags going broke?
Looks like their debt load coincided with the recession. They emerged from Chapter 11 restructuring in May, 2010 and shares started trading on the stock exchange in June, 2010.
Aqworlds wiki hell quest number load shop 2010 beta shop?
The beta shop number is 4 or 5 try it
Bear the load or bare the load?
Bear the load. Bare the load would be to uncover the load...
Are there any take that tickets left for 2011?
there are probably a load left: ~ reports from the ticket sellers is that they have sold out by 1500 hours on 29/10/2010
What is a live load?
Live load is a load on the object other than the load from itself.
Define moment of load?
THE PRODUCT OF LOAD AND LOAD ARM IS CALLED MOMENT OF LOAD.
How may watt does a load of 3570 watt draw from an UPS of 2010 watt?
If the load wattage is 3570 watts then that is what the load wattage draws. Now by using the expression "draws" maybe you meant to say amps. If it is amperage that you are looking for then the answer can not be given without knowing what the voltage of the system the UPS is tied into.The equation to use is A = Watts/Volts.If a UPS nameplate output rating is 2010 watts then that is the maximum that the UPS is designed for by the manufacturer. Applying a greater load that what the UPS is rated for will void the warranty. Match the load wattage to the UPS's output when calculating what size is needed to operate correctly. This can be done by adding up all of the device wattages that will be connected to it. If the device does not have a wattage shown use the equation above to find the wattage.
