How do u fix a stripped out oil pan
No, mine's fine, thanks.
Over tightening the drain plug.
It is always better to restore the stripped drain pan back to its original size with a steel insert.
its either stripped or someone did it.
The plug unscrews by turning it counter-clockwise. Take the stripped plug to a good auto parts store. There are oversized, self-tapping plugs available, but they will need to match yours up to the correct replacement.
Is it just the oil plug that's stripped or is it the oil pan? If it's only the plug, get a new one from the dealer or a local part store (they are quite cheap). If it's your oil pan, then that's a pain. You'll probably have to put in a self tapping oversized plug or replace the oil pan. I would stay away from those cheap rubber oil plug replacement kits that fit in with a plastic screwdriver.
Probably just the gasket on the plug (if it's tight). Make sure the plug isn't stripped.
double gasketed or over tightened oil filter, over tightened or stripped drain plug
Buy a new one at at dealer or parts store.
You can suck the oil out of the engine by going down through the dipstick tube and changing the filter or you will have to get the drain plug out and have the oil pan repaired. You can purchase a drain plug that will work where one is stripped out. Go to any auto parts store and explain the situation.
Ask the garage for a helicoil repair.