Removal of 2003 cts radio

Answer 1

1.1) Gently pry right side of AC vents from dash releasing clips. All clips release with pressure. 2.1) Gently pry left side of AC vents from dash releasing clips. 3.1) Pull AC vents from dash. 4.1) Set AC vents on dash above opening. 5.1) Set parking brake, shift to low gear. 6.1) Open lower pocket(where lighter is). 7.1) Remove insert(coin) from pocket. 8.1) Remove exposed screw from insert removal. I believe 2 screws. NOTE - If using a non-magnetized socket when reinstalling this screw, place a piece of paper onto the socket first and push screw into socket to secure. 9.1) Gently pry top right side of dash AC controls panel releasing clips. 10.1) Gently pry bottom right side of dash AC controls panel releasing clips. 11.1) Gently pry top left side of dash AC controls panel releasing clips. 12.1) Gently pry bottom left side of dash AC controls panel releasing clips. 13.1) Pull entire dash AC control panel from dash, while connected, lay to left side of center console toward feet. 14.1) Remove one screw top left from AC vent cavity. 15.1) Remove one screw top right from AC vent cavity. 16.1) Remove one screw bottom left from AC control panel cavity. 17.1) Remove one screw bottom right from AC control panel cavity. 18.1) Pull car stereo from dash. 19.1) Remove antenna and release triggers on connectors to disconnect.