You could repair it yourself, but by the time you buy the parts, resurface the piston cylinder with specialized tools, and spend all that time, you're much better off purchasing a re-built caliper.
See "Related Questions" below for more specifics and details on the procedures.
High pressure coolant is blowing out through a small hole in your heater core, it will need to be repaired or replaced. If it is warm out it might be AC refrigerant leaking.
leaking what??
The number to Taurus customer service is 305-624-1115.
depends on the year, engine type, and what is needed to be repaired. i replaced the trans on a taurus a few years ago and it cost $2700 with labor. hope this helps.
Proper Torx bit or wrench for caliper C-Clamp to retract piston to get it off the disc
If a transmission is leaking fluid, it is likely that a seal or gasket has failed. Replace the gaskets and seals and the leaking should stop.
Sounds like a heater hose got left loose or maybe one of the hoses are leaking a little.
To compress the rear brake calipers on a 2008 Taurus X, you will need a brake caliper tool or a C-clamp. First, remove the wheel and brake caliper to access the piston. Then, either use the caliper tool to rotate the piston back into the caliper housing or place the C-clamp over the caliper and gently compress the piston straight back. Ensure the brake fluid reservoir is checked to avoid overflow during this process.
your heater core is leaking i would replace it.
Remove the brake caliper, then the caliper frame mounting. ( just two bolts on the inside of knuckle) Now the rotor is free to come off.
Remove brake caliper and caliper frame, then take out rear spindle and remove bearing from it. Refit new one opposite way.
Replaced by other models.