Set the set to the desired position, also side mirrors & seat belt/headrest, then press memory button. Press driver 1 button (or driver 2, if it's for second driver)
How do you set timing on a 1995 Cadillac Deville
how do i set the timing on a 1998 cadillac deville 4.6
(cts&sli)
Yes they will, with a set of 245x30 tire they will fit like a glove with no rubbing at all.
how do i set my timeing on a 1992 cadillac v8 4.9 liter
On the radio there is an icon that looks like a clock. It should be the top right button. Press the button and the time display will appear. Turn the tuner knob to adjust time and then press it to set the time. As soon as you set the time, the clock on the instrument cluster will automatically set.
it might be your fuse. Does your seat warmer work?
There are no spark plugs wires on cts [03 for sure] the coils set direct on top of plugs. Intake manifold has to be removed to get to them.Also thermostat is in that area. Reply:: On a 2003 Cadillac CTS, there is NO spark plug wires. There is no need in removing the intake manifold, the coilpacks set on top of the spark plugs, the only thing you have to remove on the driver side is the power steering pump reservoir to gain access to the coil packs. There is only two bolts that hold the coilpack in place. Use extreme caution when removing colipacks due to them having springs attached to each coil. On the passenger side you have to remove a couple of brackets that hold the wiring harness in place, repeat on the driver side as well. There is DEFINETELY NO need to remove the intake manifold! I hope this is helpful and saves you alot more time and money. Regards: A 2003 Cadillac CTS Owner.
Set it to exact manufacturer specifications.
# Press the TUNE/SEL knob to enter the main menu # Turn the TUNE/SEL knob until set clock appears on the display # Press the TUNE/SEL knob to select set clock # Turn the TUNE/SEL knob to adjust the time # Press the TUNE/SEL knob to update the time.Time updated will appear on the display
Turn the ignition to run. On the radio controls, PULL the scan button out to set the hour. Once the the hour is correct, PULL the seek button out to set the minutes.