Traction control on/off switch is located inside glove box . In relation to resetting the traction control system , disconnect the main fuse/relay that runs the nav/audio/climate control (that is the device that controls stability systems like traction control or ESM.) For about 60seconds . WARNING. This will also reset all maintenance type readouts like oil life percentage and trans fluid percentage.
How to reset the service traction control light on a 2007 Chevy Sub?
How to reset the service traction control light on a 2007 Chevy Sub?
If the abs/traction light is on you have a problem with the system. When the problem is fixed the light will reset itself after a short drive.
How to reset the service traction control light on a 2007 Chevy Sub?
The light is on because there is a problem detected by the ABS/Traction control module. Once the problem is fixed the light will reset itself after a short drive.
Scan tool
Traction control is what keeps your wheels from spinning on ice dirt mud etc. On the end of the gear shifter is a button and it should say with an arrow "traction control". If functioning properly, when you push the button it will turn traction control back on.
YOU CAN TAKE YOUR BATTERY CABLES OF AND THEN PUT THEM BACK ON, THE COMPUTER WILL RESET IT SELF, BUT IF YOU HAVE NOT FIXED THE TRACTION PROBLEM THE LIGHT WILL COME BACK ON..
You don't reset the light. The light is on because the Traction Control is turned off. Turn it back on and the light will go off. Look on the shift lever for a button.You don't reset the light. The light is on because the Traction Control is turned off. Turn it back on and the light will go off. Look on the shift lever for a button.
If you have made the correct repairs, a short drive will clear the light.
you cant bad speed senser in one of the wheel bearings is abs light on?
In the 2000 model you press the button just behind the stick shift on the center consel.