I just replaced front turn signal bulb. Since all of them (signal and fog lamps) are integrated with the bumper, you have to do that from beneath. First ,turn your wheels to the max left (if you replacing left side bulb).Inside the arch you'll see that it is covered by plastic shield.You will have to remove plastic clips on the sides of that shield.There are six of them and they are clearly visible.Be careful not to brake clips.Use flat screwdriver to pull hat first,then the whole clip can be removed with fingers.Once all six clips pulled out,plastic shield will almost fall by itself - no efforts needed to detach it. That's it - you've got the access to your signal and fog lamps.
Removing the tire and blocking the front end first with jack stands makes the access much better.
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
Push in and turn.
Get a creeper and go at it from the bottom, all of what you need is right there.
Not 100% sure about what model of cadillac you're talking about. See sources and related links below to lookup by Model.
How do you replace a turn signal bulb in a 1998 cavalier
remove side inner panel and remove the nuts and assembly will come out
need to know what bulb. The check engine bulb
I believe that an assembly in trunk needs to come out and in that assy you will bind a light housing connected that holds the bulb in question
trouble putting right front signal bulb in.
How do you replace the side mirror turn signal bulb on a 2008 Passat?
“how to replace headlight bulb 2003 park ave”
How do you replace the front turn signal bulb located on a 2001 Buick Century?"