0
What else can I help you with?
Knocking sound floorboard driver's side frontend 1995 Cougar AFTER the vehicle has warmed up. You hear the sound only when you apply the brakes.?
Check for a worn or warped break rotor on the front driver side. You may need to replace the break pads and rotor.
Why do drivers have to pump brakes to stop their vehicles?
Drivers have to pump their brakes to stop their vehicles because it helps maintain control and prevents the brakes from overheating. Pumping the brakes allows the driver to apply pressure in a controlled manner, which can prevent skidding and ensure a smoother stop.
If you drive through water your brakes may become slippery and ineffective to dry the brakes off?
apply your brakes gently while accelerating at the same time
At 20 mph the average driver will travel how many feet before they hit the brakes?
At 20 mph, the average driver will travel approximately 88 feet before hitting the brakes. This accounts for the time it takes for the driver to perceive the need to stop and physically apply the brakes.
When experiencing a tire blowout the driver should apply the brakes quickly and pull off the roadway to check the tire ture or false?
ture
How many feet for an average driver moving 20 miles per hour to apply their brakes the moment danger is detected?
10 feet
What does you it mean when there is a grinding noise on vechile on driver side?
Brakes could be bad, or wheel bearings too, des happen when u apply th brakes or just when is rolling? either way answer is probably around the tires
Car pull to the right when brakes are apply?
Time for new brakes or adjustment.
How will the thinking distance change if the driver is tired?
If a driver is tired, their reaction time will be slower, causing the thinking distance to increase. This means it will take longer for the driver to process information and decide to apply the brakes. As a result, the vehicle will travel a greater distance before the driver even begins to brake.
How long do brakes last on a 2007 sierra?
The amount of time brakes last depends on several factors including:how often the driver must apply the brakes,how hard the driver applies the brakes,what quality of brakes (pads and/or shoes) are being used,and finally, other factors like brake fluid leaking onto the pad or shoe surfaces.The best way to determine the situation is to take off a wheel and measure the thickness of the pad or shoe periodically, at least every five to ten thousand miles.
Why does my 1995 Oldsmobile achieva brakes grab when you apply the brakes and the car shimmies?
it broke
What is the main purpose of power assisted brakes?
The main purpose of power-assisted brakes is to reduce the amount of physical effort required by the driver to apply the brakes. This system enhances braking performance by using a vacuum or hydraulic mechanism to amplify the force exerted on the brake pedal, allowing for quicker and more effective stopping. Power-assisted brakes improve safety and control, particularly in emergency situations, by providing more responsive braking with less driver input.
