answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Where can you find replacement lean adjustment screw and plastic washer assembly for a nordica 982 ski boot?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you get thermostat out of plastic neck of housing in a 2001 Daewoo Lanos?

The Complete Thermostat Assembly must be replaced as a unit It CANNOT be dissembled!! Replacement assembly’s are available from “http://www.daewoous.com/”


How do you fit a replacement headlight bulb on an s type jaguar?

To replace the headlight bulb in an S type Jaguar, you will first have to remove the plastic cover across the top of the assembly. After moving the turn signal bulb assembly out of the way, you then remove the second plastic cover from behind the assembly and replace the bulb from there.


How do you fix the tail lights for Scion tc when the plastic covering is broken?

You need to purchase a replacement taillight assembly for the side that is broken. The lens is not sold separately.


2002 Chevy Avalanche 1500 sideview mirror assembly is broken and loose Can you repair it yourself or does it have to be replaced?

If the glass is broken, They make a replacement glass you can by at NAPA it glues in. If the plastic mirror assembly is broken, Then go to junk yard or GM dealer and by a new one. Replace whole assembly.


How do you replace a rear brake bulb on a 1992 Buick Riviera?

you open the trunk. Pull back the carpet covering the back side of the taillights. Remove the plastic wing nuts, about six or eight. Slide the whole taillight assembly to the rear. The bulbs pop out of the assembly for an easy replacement.


How to locate the idle adjustment screw for a 1992 300zx?

under the plastic in the middle


How do you replace the door mirror on a Geo Metro?

pretty simple really... the plastic triangle will pop off with a little effort.. then there are 3 short screws that hold the mirror in place. after that you will have to carefully negotiate the adjustment lever out through the hole. replacement is just the opposite. I have found that if the three (long) plastic screwholes have broken off, you can retap what is left and resecure the same mirror assembly using 10-32 screws that are 1-1.25" long. I just did this with my mirror that had broken off 2 weeks ago.


Can plastic knee replacement cause copd?

My mother is 80, has COPD and is considering a total knee replacement


Where can you find replacement heel and toes for Nordica ski boots?

Call Dynastar/Lange @ (435-252-3300) and order them.I e-mailed Lange for new heel parts and this is the response I received;I'm sorry but we have exhausted our supply and they are no longer available.Keith MyersRossignol Group Service Manager USARossignol, Dynastar, Lange, Roxy AlpineFrom: Les Walsh [mailto:lwalsh583@hotmail.com]Sent: Wednesday, February 22, 2012 9:19 AMTo: info DynastarSubject: Replacement Parts for Lange BootsI own a pair of Lange ski boots size 13, and recently the plastic heel pieces broke off. They are MID 56 Mid System boots, men's size 13. There is a 342 mm mark by the heel. I have attached two photos. Please let me know if I am able to order two of these heel pieces from you.Thank you,Les Walsh


Where can one purchase a replacement for plastic vents?

One can purchase a replacement for plastic vents from hardware and building supply stores. Alternatively, one can also find these online at sites such as eBay and Amazon.


How do you repair broken headlight adjustment on 1998 BMW 528i?

Unfortunately, you have to replace the whole headlight assembly. Just went thru that after an accident. There are small plastic "rods" that hold things in place and apparently once they break, there is nothing else you can do. Be sure you are sitting down when you get the estimate........


How do you vertically adjust the head light on a 2000 Cougar?

When you open the hood and look at the headlight assembly you will see 2 plastic gears, they take a hex tool, and the one to adjust the lowbeams is the outermost one towards the fenderwell of the the high beam adjustment is the one closest to the radiator.