Depends on if (and how may tmes) the cylinder has been bored.
If the piston has come out, the caliper will need replaced.
You need to turn the piston clockwise and it will slowly retract as you turn.
1996 SUZUKI RM125
need diagram for wheel assembly 1999 suzuki vitara
interior blown head gasket. you need to call a rebuild shop or a dealer immediately. Answer Another possibility is that the piston rings or the piston itself is bad and fuel is making its way past the piston/cylinder area and into the base of the engine......in either case, it needs attention ASAP.
You need a better question.... If its rusted to the rotor use PB Blaster to free it then replace brake pads. If the caliper piston is frozen then you need to rebuild the caliper.
You need a hydraulic press to press the pin into the piston and through the connecting rod
No need to when disassembling.
To get the area of a piston, you need to measure the diameter or radius of the piston head and use the formula for the area of a circle (A = πr^2) where r is the radius of the piston head. Once you have the radius, plug it into the formula to calculate the area of the piston head.
Diagram for a Suzuki quad runner
probably the rings are stuck or either it needs new ones or the piston is bad probably need to have the cylinder bored and the motor rebuilt it will cost about $170
Keiichi Suzuki, Managing Director, Suzuki Malaysia Automobile Sdn Bhd, i need his email id