0
What else can I help you with?
If you have a 22 tooth sprocket what is the correct size for your freewheel?
Usually the sprocket is an inseparable part of the freewheel, and the size of the freewheel is determined by the hub.
What size freewheel do you need for a 23 tooth sprocket?
you don't use a freewheel for a 23 tooth sprocket you need a cassette hub heres gear ratios for yaSprocketF/W or Cassette2282382592810301133123613391441154416
What size freewheel do you need for a 24t sprocket?
Unless by freewheel you mean driver (in which case 8-9) I haven't ridden bmx in a few years but last time I checked the smallest freewheel you could buy was 12 tooth which would make for quite a low ratio
What size wheel do you need for a 25t sprocket?
I'm assuming you're talking about a BMX here, which use the words a bit different from the rest of the cycling world.So it's the size/tooth count of the freewheel that you're asking about.And then it's just as much about what you want as what you need.When you change the sprocket/freewheel size you change the gear ratio.A big sprocket and a small freewheel lets you go fast, but you'll have to push harder.A bigger freewheel will cost you some top speed, but will make it easier to get the bike moving.A very common combo is 25t front and a 9t rear.
What size sprocket can a 9 tooth driver fit on?
a 25 tooth sprocket will fit on a 9 tooth driver
What size driver fits on a 25 tooth sprocket?
9 tooth driver
So I bent the sprocket on my bike 09 HARO F2 now I am looking at a 25t sprocket but the problem is i only have about 80 dollars for both parts and I dont know what size driver or freewheel i need?
If the driver/freewheel isn't too badly worn you can keep using it even if you replace the sprocket.
Sprocket size for 350 warrior?
13 tooth front/ 40 tooth rear
Rear Sprocket size for a 99 banshee?
41 tooth
What is the rear sprocket size of a 1981 200 Honda 3 wheeler?
It uses a 47 tooth sprocket.
Rear sprocket size for a 04 Yamaha yz450?
going by all the other yamahas raptor banshee blaster i would say its a 40 tooth Yamaha always goes with a 13 tooth front sprocket and a 40 rear
What is tooth size on a bike?
There isn't much need to discuss tooth size as such. The important things are which width of chain the sprocket is intended for and the tooth count. Tooth count decides which gear ratio you get.
