120 nm.
The Honda accord rear will bearing should be torqued at 60 pounds. You can ruin the wheel bearing or the wheel seal if you over torque the wheel bearing nut.
235nm
Rear wheel bearing nut tork setting
What is the torque for the following Nissan navara QD32 1)main bearing cylinder head 3)conrod bearing 4)fly wheel
290 nm front wheel bearing 1.7 puma
citroen saxo 1.4. what is the rear brake hub torque setting?
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.
The wheel torque setting is 76
Front hub/wheel bearing torque is 190-210Nm.
A torque wrench, usually a power torque wrench
80 ft-lbs. The home mechanic can just use a regular wrench, tighten by hand, then step on the end of the wrench to torque it adaquately (don't stomp on it).