Want this question answered?
Depends if it fiberglass or Aluminium. For Fiberglass you would be looking at around 50hp-60hp and and Aluminium would be between 30hp and 40hp.
to calculate the recommended occupancy for any boat under 20ft: length times width divided by 15 L x W / 15 = Maximum occupancy
It depends a lot on the size of the boat. If it say, a 12 foot boat, probably about 7 or 8 knots (about 10 mph). On a bigger boat slower. As was said these small engines are used mainly for dinghies and for fishing. Answer: I have a 8 foot fiberglass dinghy with a 4 Hp outboard. My GPS says 11km/h under full throttle on a calm lake.
you must have at least 1 white light
width of 12 foot aluminum boat
Easiest is probably a pair of tweezers, although fiberglass can also be scraped off the skin if you use a blade - obviously don't cut yourself
can you pull a 36 foot house boat with a pickup truck
That would vary as there are many variables, most notably, what size outboard are you talking about. Also, is the boat fiberglass or aluminum? For a fiberglass bassboat, 16', with a 60 or 70 HP motor, you would be in the 2700 - 3100 lbs. range. This all depends on Mfgr. and year of the boat. As far as aluminum, it would be quite a bit lighter. How much, I'm not sure (even though my first bassboat was aluminum). How's that for a definite maybe? Sorry I couldn't have given a better answer.
he had a boat and horse and by foot!!! got it get it good he had a boat and horse and by foot!!! got it get it good
Claw foot bathtubs can be made out of porcelain, acrylic or fiberglass. Claw foot bathtubs were popular in the 19th century and are usually accompanied by a shower.
It depends on the construction.
The weight of a typical 21 foot boat and trailer is around 4,000 pounds. The actual weight varies based on the model of boat and its load-out.