0
Typically called "the key" this is the area underneath the goal starting at the baseline on either side on the basket and extending 15 feet from the basket to the free throw line (this area alone is called the paint). on the outside of these lines are several 1 foot long stripes and a single square on either side called the block.
these blocks, stripes and lines together make up the key because of the general shape they make. midrange jumpers are associated with this area (top of the key)
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
When was Keyway Air Transport created?
Keyway Air Transport was created in 1986.
What is the purpose of a keyway in a slab on grade?
The purpose of a keyway is to stop the movement of the foundation.
Is the keyway on a small block Chevy at 0 degrees?
This is a good question. Yes, the keyway, is accurate. What is not, is the balancer. After 74, the balancer keyway is offset, from the timing mark. Any harmonic balancer you use, look to see where the keyway is, compared to the hash mark on it. Make sure they line up.
Where was the keyway invented?
in Glasgow i think
How do you put a go kart clutch on?
to put the clutch on omn side of the motor theres a crak and you to the clucth on there then put the keyway in the slot or you dont have to if the clucth has a biuld in keyway
Remove the torsion bar in a dodge ram?
Jack the front end up and support it w/jackstands. You can either use a torsion bar unloading tool or rent a ball joint press which is what I did, and place it around the crossmember to where the keyway or "porkchop" is located. Apply presure to the keyway by screwing the balljoint spacer as if you were tightening it. This will relieve the pressure off the keyway adjustment bolt so you can unscrew it and take out the keyway bolt keeper. Next unscrew the ball joint press and the keyway will fall lose. Then you can pull the torsion bar all the way through to remove it.
Where are the timing marks on cam gear on a 3.1v6 Chevy Lumina 91?
the timing marks are not on crankgear on cam gear Chevy Lumina 3.1 1995 would it be keyway to keyway
What kind of instrument is Keyway Broach?
A keyway broach is consider a cleaning tool to help remove certain material from whatever object you are cleaning. Broaching is the term used for the use of this tool.
Can a harmonic balancer have the wrong keyway?
A replacement balancer could have a wrong keyway. The vehicle could be a half year, meaning that the balancer is listed for one year newer or older vehicle, or the balancer could have been made wrong.
What drives the oil pump in a 96 chev with a 5.7 l?
A keyway on the bottom of the distributor.
Why do you need a keyway in the construction of a wall?
typically, a keyway is found in a wall made of concrete where there is two separate pours which abut themselves, otherwise referred to as a cold joint. it makes sense to insert a concave keyway continously along the length and in the center of a section of the first wall section poured to receive an abutting concrete pour at a later date. this inserted keyway creates an interlocking style effect between the two abutting pours which creates a higher quality connection than simply butting the two pours with nothing to interconnect them. typically, a keyway is found in a wall made of concrete where there is two separate pours which abut themselves, otherwise referred to as a cold joint. it makes sense to insert a concave keyway continously along the length and in the center of a section of the first wall section poured to receive an abutting concrete pour at a later date. this inserted keyway creates an interlocking style effect between the two abutting pours which creates a higher quality connection than simply butting the two pours with nothing to interconnect them.
Why does a lawnmower rebound back while trying to start it?
generally when a pull rope jerks back when pulling it is a sign that you have a sheared flywheel key. remove the screen off the top of the flywheel and look to see if the keyway on the flywheel is offset to the keyway on the shaft
