The distance is 50 feet.
35 feet from the tip of home to the front edge of the pitching rubber.
The distance for a softball pitching rubber is based on the age and ranges between 35 feet to 43 feet.
From tip of plate to front of rubber
From the apex of home to the front edge of the pitching rubber.
Although the distance may vary between leagues and associations, the pitching distance in 10 and under modified or fastpitch softball is usually accepted to be 35 feet. This distance has changed in some national associations over the past few years, and you may find anything from 34-36 feet. This is measured from the back point of the WHITE part of homeplate (not the black part) to the front-middle of the pitching rubber.
The pitching distance is 40 feet from home plate to the back of the pitching rubber. For 18U Gold and collegiate softball the pitchers mound is 43 feet away. This is because pitchers throwing at these levels throw much faster than those at the lower levels, making it a lot harder for batters to identify pitches.
24 inches by 6 inches
in ASA rules yes in USSSA softball rules no
The distance from second base to the pitching rubber is the same as the distance from the plate to the rubber. It is 60 feet 6 inches.
If you have an age where the pitching rubber is 43 feet from the home then the front line or the batters box would be 38 feet 3 1/2 inches from the rubber. If you are at a younger age where the pitching distance is shorter then minus 4 feet 8 1/2 inches from that distance and you will have the front line of the box.
The distance between the front of the pitching rubber, where a pitcher must start his delivery, and the back of home plate is 60 feet, 6 inches.
6 inches by 24 inches
6" x 24"
35 feet from the rubber to the back of home plate.
The distance between the baseball pitcher's mound and home plate is 60 feet six inches.
24" Long 6" Wide
It's a radius of 8 feet from the center of the pitching rubber.
7U and 10U - 35ft.
Pitching distance is measured from the front of the rubber to the apex or back of home plate.
Radius is 8 feet with the center being 18 inches in front of pitching rubber.
60 feet and 6 inches between home plate and pichers rubber