If the mainsail is rigged for and aft it's most often called a sloop.
A Jib is a secondary sail which is generaly smaller than the mainsail, and is usually possitioned at the frount of a boat (a foresail). It is generally triangular and is used to counteract the turning force of the mainsail around the pivot point of the vessel in some classes of boat.
It depends on the type of vessel and how it is rigged. The smaller sail on a standard sailing boat is the jib or genoa
The jib (that's the one up front at the pointy end) is almost always larger, especially if it's a spinnaker for running with the wind.
On upwind legs, the jib serves to direct the air around the leeward side of the mainsail to reduce pressure on that side, causing forward propulsion in accordance with Bernoulli's Principle. On downwind legs, it serves more like a mainsail, providing additional surface area to drive the boat. This is true of any jib sail on any boat.
The front sail is the jib. The back sail (the one attached to the boom) is the mainsail.
The jib sail is the triangular staysail in front of the foremast. Sometimes a spinnaker replaces the jib. They are both generally referred to as "headsails".
Depending on how it is rigged it could be the jib, Flying jib or spinnaker.The most forward sail is normally called a jib.On vessels with more than one jib, the names of the jibs (from forward to aft) are: Flying jib, Outer jib, Inner jib and Fore (topmast) staysail.
The most forward sail is normally called a jib.On vessels with more than one jib, the names of the jibs (from forward to aft) are: Flying jib, Outer jib, Inner jib and Fore (topmast) staysail.
The jib's sheet controls the angle of the jib (sail) to the wind. It is attached to the lower end of the jib that is farthest aft.
The front sail is the jib. The back sail (the one attached to the boom) is the mainsail.
It is a jib or fore sail that has a slot cut into it.
It is called a 'Jib'.