Shaft is the handle of the golf club.
Depends on the Club. Lower number clubs have a longer shaft, and a more vertical face.
it is a taylor made golf shaft that has a smaller dia at the bottom of the grip .
Hosel is the the socket (or neck) in the head of a golf club into which the shaft is inserted.
No, a golf shaft will fit both right and left handed clubs.
The Hosel (one 's') is the socket or neck in the head of a golf club into which the shaft is inserted.
You might "trim" or shorten the shaft of a golf club if it is too long for the person using it. Basically, the club was designed for a taller person than the one wishing to use it, but it is often cheaper to shorten the shaft of an old club than get a new shaft or new club.
Nothing it is a brand of shaft, the specs in all shafts differ
It varies from club to club. It is on one of these; the hosel of the golf club, on the shaft, on the shaft sticker, underneath the grip or somewhere on the head. It is quite easy to find. If you cannot find one, it may not be the original shaft or it simply may not have one.
Distance. The longer the shaft the wider the arc during a swing which translates to more club head speed which translates to more distance.
The end that's closest to you when you are swinging it.
have one custom made
shaft my hubby says its a grip
Metal golf shafts are made of steel.
a club with an appropriate shaft flex and length for the size and strength of the youth.
The socket is known as the hosel, it is where the head is connected to the shaft.
You get shaft entensions and cut them to size. Then you take the grip and grip tape off the club. They fit into the current shaft and must be glued in place as shaft extensions must be permanent. You then reprip the club
A man's golf club will be longer and unless its an iron there will be diffrent sharft flex.
If this is gluing the shaft into the head, epoxy is best.
There are three main parts, the head, the shaft and the grip.
Proper golf shaft epoxy. You can buy it from some internet stores and good golf shops.
To a certain extent yes. In theory, the longer the shaft, the greater the distance is between the pivot, which is the hands, and the club head. Therefore more momentum can be generated.