POWERED BY A BUTANE GAS CANISTER, SIMILAR TO THOSE USED FOR CAMPING GAS STOVES.
CANISTER WILL BE MADE IN TH UK WITH COMPONENT PARTS SUPPLIED FROM cOMPANIES IN THE UK
Fuels used for the Olympic torchesEarly on, Olympic torches used everything from olive oil to gunpowder as a source of fuel. Some torches were lit with a combination of hexamine and naphthalene along with an igniting liquid. Occasionally, these early-model Olympic torches proved dangerous to the torchbearer. For example, the torch used in the 1956 Games was lit by a mix of magnesium and aluminum, which wound up searing the arms of the torchbearer during the final leg of the Olympic relay. Liquid fuels, which become gaseous to create a flame, were first used to light the torch for the 1972 Summer Games in Munich, and they have been used to ignite every Olympic torch since then. The benefits of liquid fuels include safety and easy storage.
The ECM powers the fuel pump relay
No. The auto shutdown relay powers the fuel system.
With a signal from the ecm it powers up the fuel pump.
Lenght 80,0 cm / Weight 800 gr without Canister / Weight 1.090 gr with fuel Canister/
An alcohol torch is a stove/torch that uses a fuel from the alcohol family.
The Chevrolet Lumina fuel pump is powered by the electrical system. The fuel pump has a ground wire and a positive wire. The positive wire goes to the fuel pump relay switch.
check fuel pump relay,it powers on for 2 seconds when you turn the key on and then runs after it detects engine crank revolution.
The main relay and the fuel pump relay are the same. Take the fuel pump relay and swap it with the main relay and see if that will help you....
You should check to see if the fuel pump relay is working, when the key is cycled,it should "click on and off in about two seconds. If you donot have a fuel pump relay check to see taht your ASD ( Auto shut down ) relay is not blown. This relay powers your spark and fuel pump. That is where i would look first.
Swap the fuel pump relay with another like relay.
The fuel pump shut off relay is usually located just in front of the drivers side strut tower.The same one also powers the +12v on the coil.