if you are talking about a running track you measure it in meters. but a Nascar track is measured in miles.
Synonym: keep track of
For the width, measure the length of the track or pole and add an inch for overlap in the middle. The height should be measured from the top of the track or the small metal ring for a pole.
get a gallon of water for yourself and keep track
When I was racing the small roundi-rounder tracks they usually measured the "inside", The smallest part of the track. Need to know how to measure a race track? Obviously if you run up around the outside wall you are traveling significantly farther than if you are down at the bottom of the turn. So how does NASCAR measure? They measure track length from the point 15-feet in from the outside wall. This means that at many tracks the drivers are traveling a shorter distance than advertised (but not by much).
Stop watches to measure time, tape measures to measure distance, and an anemometer to measure wind speed for track and field events.
They measure wind,moisture, and pollution
I believe not. they measure walking distances.
Use it to keep track of customers, measure medicine, keep track of dosages, research, and diagnose diseases in the best possible way.
Rail gauge is the term used to measure the spacing of the rails on a railway track. This term is used in Australia. In the U.S., we use the term track gauge.
The unit that would best measure the distance of a matchbox car on a toy track is meters or centimeters, depending on the precision needed. These units are commonly used for measuring distances in science experiments and provide an accurate measurement of the car's movement along the track.
An 8 lane track is 9.76m wide, so divide by 8 gives you 1.22m. Or you can go and measure it.
To install curtains on a track for your sliding glass door, first measure the track length and purchase curtains that fit. Attach the track to the ceiling or wall above the door. Slide the curtains onto the track and secure them in place. Adjust the curtains as needed for proper coverage and functionality.